1. Aligning the Chair and removing its base Office Swivel Chair on a flat surface and make sure it is in a horizontal position. Remove the fastening clip at the bottom of the seat and then take off the foundation.If the base of the bolt or nut is fixed, it can be loosened and removed with the appropriate wrench.
2. Check Indoor Chair See if the chairs are damaged.If other damaged parts occur, the reference instructions are replaced in the correct way.
3, remove the existing cylinder On the cylinder tube clamp, open it and loosen the cylinder until it falls off easily.Be careful not to pull forcibly, or you may damage other parts of the chair.
4, the installation of new cylinders Buy a new cylinder.Be sure to select the appropriate replacement.
5. Re-assemble the Chairman Use wrench to tighten all bolts and nuts and remove. When the whole chair is reassembled, check that the cylinder is working properly by adjusting the height of the seat.
Related Industry Knowledge
- Cleaning attention
- Cleaning method of net cloth computer chair
- The structure of office swivel Chair
- Computer chair to buy a wonderful trick
- Comfortable computer Chair purchase
- The composition of the boss's chair
- Office chair cushion
- Executive Chair Features
- Computer Chair classification
- Selection of computer Chair cushion
- HOW TO BUY AN OFFICE CHAIR
- New Trends in Office Lifestyles